Build your drone.
Part by part.
Twelve component categories. From frames and motors to flight controllers and FPV cameras. Pick the part — we'll ship it. Pick a kit — we'll ship the BOM. Pick the build — we'll do the whole airframe ready-to-fly.
Trusted by IIT / NIT / IISc / DRDO robotics labs, FPV racers, drone start-ups and agricultural-drone fabricators across India. Pan-India insured delivery, GST invoice for ITC, expert build advisory, BetaFlight / ArduPilot / INAV / PX4 firmware tuning included.
Twelve building blocks. Click any tile to shop.
We've grouped components by what they do on the airframe — Airframe, Propulsion, Power, Brain, Vision, Wiring. Every tile takes you to that subcategory.
When electric isn't enough — combustion engines for serious UAVs.
ZT-series gasoline UAV engines for heavy-lift VTOL, fixed-wing and long-endurance industrial / defence platforms. Twin and four-cylinder configurations, air- and water-cooled, up to flagship horizontally-opposed boxer-4 designs. Pan-India delivery with installation and integration support.
ZT-T120 Twin Cylinder
- Twin-cylinder gasoline IC engine
- Light heavy-lift UAV class
- Long-endurance payload missions
ZT-T170 Twin Cylinder UAV Engine
- Twin-cylinder fuel-injected engine
- Mid-class UAV propulsion
- Hour-class flight endurance
ZT-T222 Four Cylinder UAV Engine
- 4-cylinder UAV propulsion engine
- Heavy-payload long-endurance class
- Higher torque & smoother run
ZT-T350 Twin Cylinder - Air-Cooled
- Twin-cylinder · air-cooled
- Heavy-lift VTOL & fixed-wing UAV
- Simpler cooling · field-serviceable
ZT-T350 Twin Cylinder - Water-Cooled
- Twin-cylinder · water-cooled
- Sustained high-power output
- Hot-climate / high-altitude duty
ZT-T550 Four Cylinder Horizontally Opposed
- Horizontally-opposed 4-cylinder
- Low-vibration boxer layout
- Large UAV / long-endurance missions
Every accessory we stock in one place.
Lenses, RTK stations, aerial mapping cameras, spotlights, speakers, gimbals, controllers, spares and more - 59 genuine accessories with GST invoice and pan-India delivery.
From a pile of parts to flying airframe — six steps.
Pick the frame
Quad, hex or octo. Size matched to your prop diameter and intended payload.
Power chain
Battery → ESC → Motor → Propeller. Sized as a complete chain — KV, amp rating, prop diameter.
Flight brain
Flight controller + GPS + IMU + sensors. Pick BetaFlight (FPV) or ArduPilot / PX4 (autonomous).
Power system
PDB and BECs to deliver clean 5V / 12V to FC, video, lights without RF noise.
Vision link
FPV camera + VTX, plus VRX and antennae on the ground side. Analogue or digital (DJI / Walksnail / HDZero).
Wire, tune, fly
Silicone wire, XT60 / XT90 connectors, solder, calibrate ESCs, tune PIDs, test in a safe area, then fly.
Six pre-built kits for the most-asked builds.
Want a starting BOM? Pick a kit. We refine it for your exact specs and ship the complete component set with build instructions.
5" FPV Racer
210 mm carbon frame · 2207 / 1850 KV motor · 30A 4-in-1 ESC · F7 FC · 6S battery · 5" props · analogue or DJI O3 video. Light, fast, sub-500 g AUW.
FPV pilots · racing · freestyle7" Long Range
300 mm frame · 2806.5 / 1300 KV motor · 50A ESC · F7 / H7 FC · 6S 5000 mAh · 7" props · DJI O3 / Walksnail digital video · GPS + RTH. 30 km+ range achievable.
Long-range FPV · cinematicCamera Quad (DIY)
450 mm frame · 4108 / 380 KV motors · 40A ESC · Pixhawk-class FC · 6S 6000 mAh · 13" carbon props · gimbal · GoPro / DJI O3 / Sony RX0. 25-min flight.
Photographers · pro creatorsAgriculture Spray
Hex 1100 mm frame · 8108 / 100 KV motor · 80A ESC · Pixhawk Cube · 12S battery · 22" props · 10–16 L tank · spray nozzles · RTK GPS. ArduCopter firmware.
Agri-drone fabricators · MGS · IoTechWorldResearch / R&D Build
Custom frame · brushless motors · Pixhawk Cube + RTK GPS · LiDAR · companion computer (RPi / Jetson Nano) · ROS2 integration. Fully open firmware (PX4 / ArduPilot).
IIT · NIT · IISc · DRDO labsMini Indoor Quad
Tiny Whoop 75 mm frame · 0802 / 22000 KV motor · 5A 4-in-1 ESC · BetaFPV F4 FC · 1S Whoop battery · ducted props. <30 g AUW.
Indoor practice · studentsFrom T-Motor to Pixhawk · Foxeer to Tattu.
Every brand listed below is in-stock or 1-week special-order. Bulk orders and special-order items quote on lead time.
Six buyer profiles — from weekend FPV pilots to DRDO labs.
FPV racing & freestyle pilots
Building 3" / 5" / 7" quads. BetaFlight tuning, ELRS / Crossfire links, DJI / Walksnail / HDZero digital video. Fastest-growing buyer segment in India.
Robotics labs · IIT / NIT / IISc / DRDO
Pixhawk Cube + RTK GPS, LiDAR, ROS2 / companion computers. Open-firmware research builds. xBoom institutional invoicing & GeM listing.
Drone start-ups · custom airframes
Survey, mapping, defence, delivery, agricultural. Build the airframe first, then add specific payloads. Sourcing 50–500 components per project.
Agricultural-drone fabricators
Indian-made spray drones. Hexacopter / octocopter heavy-lift airframes with ArduPilot, big motors, big batteries, spray pumps. Bulk component orders.
Repair workshops · DJI / Autel spares
Repair shops sourcing genuine motors, ESCs, gimbal parts, batteries for customer fleets. Speed of delivery matters.
Hobbyists & students
First builds, school robotics teams, college projects, weekend tinkerers. Tiny Whoop indoor quads up to mid-size builds. Curated kits help here.
Six reasons builders buy from us, not eBay.
Genuine parts only
Direct manufacturer supply. No counterfeit clones. GST 29CTKPS7090H1ZW with full ITC eligibility.
Build advisory
Pre-purchase BOM advisory. Tell us your build goal — we recommend compatible parts within 1 business day.
Pan-India delivery
In-stock items ship in 24 hours. Transit 3–5 working days nationwide. 5–7 days to remote zones.
Build help & firmware tuning
BetaFlight / ArduPilot / INAV / PX4 calibration. Phone, WhatsApp, email support during business hours.
Bulk & institutional
IIT / NIT / DRDO / GeM-eligible invoicing. Bulk-order discounts. Dedicated account engineer above ₹50,000.
Since 2015
10 years in Indian drone retail and component sourcing. Bengaluru HQ + Dubai office.
Don't want to solder? We'll build it for you.
Component sourcing & BOM advisory
Brief us on use case, payload, flight time, budget. We propose a complete BOM, source genuine parts, and ship — let your team handle the build.
Full build · ready-to-fly
Components sourced, drone built, calibrated, firmware-tuned (BetaFlight / ArduPilot / INAV / PX4), test-flown, and shipped ready-to-fly. 2–6 weeks turnaround.
Everything else builders actually ask.
What drone components does xBoom stock?
Which brands do you carry?
Can I order a complete custom drone build?
Who buys components from xBoom?
Are these components genuine?
Do you offer technical support?
What's the delivery time?
Can I get help choosing the right parts?
Tell us about your build.
Use case · payload · flight-time target · budget. Five fields, two minutes. BOM and pricing back within one business day.
xBoom HSR Layout · Bengaluru · GST 29CTKPS7090H1ZW · since 2015 · pan-India delivery · GST invoice for ITC
Send us your component or build brief.
Tell us the part list, build goal, payload and timeline. We'll respond within one business day with availability, pricing, integration guidance and any sourcing notes for non-stocked SKUs.
